Denver E-8600 RM H700 Manuel De L'utilisateur page 69

Installing and using the battery
The e-bike has the battery located on the down tube of the frame (the battery is directly connected to
the controller box which is located under the battery).
Lift the battery above the frame down tube, align the position of the battery sliders, then place the
battery box inside the slot, make sure it fits snugly, then lock it tightly. Firmly fastening the battery,
use the key to lock the battery with the slider. (Fig.3.1~3.3)
(Fig. 3.1)
CAUTION: Be sure to remove the key and keep it safe after removing the battery from
the holder!
(Fig. 3.2)
From the initial position at 12 o'clock (where the battery is locked),
insert the key in the appropriate slot, press and turn it clockwise to
the 6 o'clock position to unlock it. Reverse the same procedure to
relock the battery.
69
(Fig. 3.3)