Publicité
Les langues disponibles
Les langues disponibles
After connecting the charger, the
charging LEDs do not light up.
After recharging for more than 4/5
hours, the charge indication LED is still
red
(note: it is very important to recharge
the
battery
according
instructions to avoid damaging the
equipment).
Solving charger-related issues:
•
Red light does not work when charging: check that the connectors are properly connected.
Check if the normal voltage went right away, if so, please check the charger repair. If the above
is correct, the battery is likely faulty.
•
The red light does not turn green: turn off the power, after 5 seconds connect the mains
supply, it can continue to charge. The battery no longer charges, the battery is likely faulty.
•
The red light turns immediately green: check that the battery is fully charged. If it is not, the
battery or charger is faulty.
1) problem with the electrical outlet
2) faulty contact between the charger
input socket and the electrical outlet
3) the temperature is too low
1) the ambient temperature is 40°C or
higher
2) the ambient temperature is 0 ° C or
less
to
the
3) The bicycle was not recharged after
use which exacerbated the decrease in
charge
4) The output voltage is too low to
recharge the battery.
1) check and repair the electrical
outlet
2) check and fully insert the socket
3) charge indoors
If the previous solutions don't
work contact your dealer or a
qualified professional.
1) recharge the battery at a
temperature below 40°C and in
accordance with the instructions
2) recharge the battery indoors
and in accordance with the
instructions
3) correctly maintain the battery to
avoid
decrease in charge
4) Do not recharge with a voltage
lower than 100 V.
If the previous solutions don't
work contact your dealer or a
qualified professional.
77
an
exacerbating
the
Publicité
