Publicité
5-3. Tipping
5-4. Connecting To Compressed Air Supply
3
1
OM-252565 Page 14
2
1
!
Do not move or operate unit
where it could tip.
!
Do not move unit by pulling
on extraction arm or equip-
ment may tip. Use handle on
fume extractor to move unit
!
Do not use this equipment to
support personnel, large
tools, or other material.
!
Shut off air supply before
disconnecting or connecting
air hose.
!
Wear protective equipment
when disconnecting com-
pressed air supply. Internal
air tank is under pressure
and will discharge when air
supply is disconnected.
!
Close cover before starting
unit or operating filter clean-
ing system.
!
Do not direct air stream to-
ward self or others.
!
If ANY air is injected into the
skin or body seek medical
help immediately.
1
3/8 in. Barbed Fitting
2
Compressed Air Supply
(72− 87 psi/496 − 600 kPa)
Clean, dry, oil-free compressed air
is needed for the cleaning system to
operate properly.
3
Air Hose
Install customer-supplied com-
pressed air fitting on 3/8 in. barbed
fitting on back of unit.
Tools Needed:
255 618-A
Publicité
