Publicité
Les langues disponibles
Les langues disponibles
Parts are located throughout the shipping carton, including underneath the grill. Inspect the grill, parts, and hardware blister
pack after removing from the protective shipping carton. Discard all packaging materials from inside and outside of the grill
before assembly, then review and inspect all parts by referencing the parts list. If any part is missing or damaged, do not attempt
to assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss® Customer Care for parts.
www.pitboss-grills.com | USA: (480) 923-9630 | Canada (Toll-Free): 1-877-942-2246
IMPORTANT: To ease installation and avoid injury, use two people when assembling this appliance.
Tools required for assembly: screwdriver and level. Tools not included.
IMPORTANT: It is advised to read each step entirely before starting assembly on instructions. Do not tighten screws completely
until all screws for that step have been installed. Hardware combination involving a locking washer and washer should be
installed with the locking washer closest to the head of the screw.
1. ATTACHING THE LEGS TO BOTTOM SHELF
Parts Required:
1
x
Bottom Shelf (#21)
1
x
Back-Right Leg (#16)
1
x
Front-Right Leg (#18)
Front-Left Leg (#22)
1
x
Back-Left Leg (#25)
1
x
4
x
Screw (#A)
Installation:
•
Open the package box, take all the components out except the Main Barrel
/ Hopper Assembly.
•
Mount the Back-Left Leg, Front-Left Leg, Front-Right Leg, and Back-Right Leg
to the Bottom Shelf.
2. MOUNTING THE CART FRONT/BACK PANEL
Parts Required:
1
x
Cart Front Panel (#23)
Cart Back Panel (#24)
1
x
Screw (#C)
8
x
Installation:
•
Mount the Cart Front Panel between Front-Right Leg and Front-Left Leg.
•
Mount the Cart Back Panel between Back-Right Leg and Back-Left Leg.
ASSEMBLY PREPARATION
ASSEMBLY INSTRUCTIONS
1
25
22
18
21
2
C
24
23
A
16
9
Publicité
