Pit Boss PLATINUM KC COMBO Manuel D'instructions page 13

15. ASSEMBLING THE SMOKE STACK
Parts Required:
1 x Smoker Stack (#4)
4 x Screw (#C)
Installation:
• Mount the Smoker Stack to the Main Barrel / Hopper Assembly.
16. SECURING THE SMOKE STACK CAP
Parts Required:
1 x Smoker Stack Cap (#3)
Installation:
• Mount the Smoke Stack Cap to the Smoke Stack
17. ASSEMBLING THE SIDE TABLE
Parts Required:
2 x Screw (#B)
Installation:
• Attach M6x15 mm screws onto right side of the main chamber and leave
about 1/4 inch out.
18. MOUNTING THE SIDE TABLE
Parts Required:
1 x Side Table (#10)
3 x Screw (#B)
Installation:
• Hang the right Side Table onto those two screws and then push ahead to
seat on it.
• Mount the Side Table to the Main Barrel / Hopper Assembly with another
three M6x15 mm screws.
• Tighten the screws to ensure they are completely secure.
15
4
16
3
17
18
10
1
¼ IN
2
13