Pit Boss PLATINUM KC COMBO Manuel D'instructions page 23

UNDERSTANDING THE CONTROL BOARD
CONTROL DESCRIPTION
The button will light up(white) when connected to a power source. Press this button to Power on the unit.
Press and hold this button for a minimum of 2 sec to power off / power down the unit.
The Temperature Control Dial allows you to set your desired grill temperature. Once connected to a power
source and the Power Button is pressed.
Press and turn the dial (When "SET" selected as shown in the picture 2) in order to select from any of the
thirteen preset temperatures, between 82-260°C / 180-500°F. Press the knob again to lock your preset temp
and get back to Actual Grill Temperature (As shown in picture 3) . Any time during the cooking process if you
want to check your preset temp just press the knob.
The Temperature unit switch button to change the temperature readout on the LCD Screen. Press the button
to switch between units of temperature Celsius (ºC) or Fahrenheit (ºF), as preferred. Default is set to Fahrenheit.
The bulb button allows you to switch the light on and off inside the grill (In the cooking area) .
Smoke iT® icon shows the connection between your grill and your phone via Bluetooth® as a result you can get
live updates about the actual temperature of the grill and the meat probe temperatures. It also allows you to
set temperature of your grill.
The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Pit Boss® is under license. Other trademarks and trade
names are those of their respective owners.
The LCD Screen is used as the information center for your unit. The LCD screen will display your Desired Cook
Temperature, Actual Cook Temperature, and Meat Probe Temperatures (if connected) . If only one Meat Probe
is connected, only one reading will be displayed. The visual display of your set temp in the form of flame
icon. It also displays the unit of temperature, that is °F/°C.
Press and hold the Prime Button to activate an extra feed of pellets to the fire pot. This can be used to add
PRIME
more fuel to the fire before opening the grill lid, resulting in a quick heat recovery time. It can also be used
while smoking, to increase the intensity of clean smoke flavor. Requested from competition cookers.
"ACT" displays the actual temperature of your grill at that moment of time. Press the dial once to switch
between "SET" and "ACT". By default, LCD screen displays "ACT".
"SET" displays one of the 13 preset temperature values of the grill. Press the dial once to switch between
"ACT" and "SET".
The Flame icon visually displays the set temperature, the intensity of the flame icon changes as you change
from 250°F, 350°F and 450°F indicating different temperature ranges.
PRIME
ACT
SET
PROBE 1 PROBE 2
PROBE 1
NO PELLETS
ACT
SET
PROBE 2
NO PELLE
23