Yamaha RHINO Manuel Du Propriétaire page 324

Masquer les pouces Voir aussi pour RHINO:

1. Bolt (× 3)

1. Vis (× 3)

1. Perno (× 3)

1. Tubo trasero

2. Spark arrester

2. Pare-étincelles

2. Parachispas

Cleaning the spark arrester

Be sure the exhaust pipe and muffler are cool be-

fore cleaning the spark arrester.

1. Remove the bolts.

2. Remove the tailpipe by pulling it out of the

3. Tap the tailpipe lightly, and then use a wire

brush to remove any carbon deposits from

the spark arrester portion of the tailpipe and

inside of the tailpipe housing.

4. Insert the tailpipe into the muffler and align

the bolt holes.

5. Install the tailpipe by installing the bolts, and

then tighten the bolts to the specified torque.

Tightening torque:

Tailpipe bolt:

9.5 N·m (0.95 m·kgf, 6.9 ft·lbf)