Publicité
1. Coolant reservoir cap
2. Maximum level mark
1. Bouchon du vase d'expansion
2. Repère de niveau maximum
1. Tapón del depósito de líquido refrigerante
2. Marca de nivel máximo
3. Minimum level mark
3. Repère de niveau minimum
3. Marca de nivel mínimo
Coolant
The coolant level should be checked before each
ride.
Checking the coolant level
1. Place the vehicle on a level surface.
2. Open the hood. (See pages 8-17–8-19 for
hood opening and closing procedures.)
3. Check the coolant level in the coolant reser-
voir when the engine is cold as the coolant
level varies with engine temperature.
NOTE:
_
The coolant should be between the minimum and
maximum level marks.
_
4. If the coolant is at or below the minimum level
mark, remove the reservoir cap, add coolant
to the maximum level mark, install the reser-
voir cap, and then close the hood.
Coolant reservoir capacity
(up to the maximum level mark):
0.35 L (0.31 Imp qt, 0.37 US qt)
8-47
EVU00732
Publicité
