Britax Roundabout 55 Guide D'utilisation page 50

Forward-Facing Installation
1 Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
2 Remove the body pillow and
unbuckle the harness.
3 Lift back cover, then pull seat
cover forward to access the
forward-facing belt path.
4 Open the red lock-off closest to
where the vehicle belt will be
buckled.
a Pull the locking tab up
b Pull the clamp down
Route the vehicle belt through
5
the forward-facing belt slots, then
buckle.
TIP: Ensure the vehicle belt is not twisted.
Remove excess slack from the bottom
(lap) part of the vehicle belt before
closing the lock-offs.
6 Ensure that both parts of the
vehicle belt are routed through the
lock-off, then close the lock-off.
a Push the clamp up
b Push the middle of the locking tab
down until locked
7 Push the child seat into the vehicle
seat while pulling the top (shoulder)
part of the belt between the belt
slots (pull away from the buckle) to
remove slack.
TIP: The shoulder part of the vehicle belt
must be on top when removing slack.
48
1b
1a
LOCKING 4a
TAB
CLAMP
4b
5
7