Britax Roundabout 55 Guide D'utilisation page 29

OR
Rear-Facing
Rear-Facing Tether Connector Strap
Because every vehicle model is different, a
location to anchor the tether for rear-facing
installations may vary. Use the rear-facing tether
connector strap to assist in creating an anchor
point.
1 Find a fixed location in the vehicle that is bolted
to the floor.
* If you cannot find a location to create an anchor point, contact the
vehicle manufacturer to identify a tether connection point.
2 Route the strap through the anchor point.
3 Thread the metal D-ring through the loop on the end of the strap.
Pull the metal D-ring through until the strap is tight.
4
5 Use the D-ring as an attachment
point for the tether.
NOTE: Store the tether connector strap in
the tether pouch when not in use.
Rear-Facing
Child Seat Functions
OR
Forward-Facing
27