Position the harness straps
5
around the child.
Fasten the harness buckle.
6
* Proper connection is confirmed
with an audible click after inserting
each buckle tongue.
Check for proper harness
7
height, and remove all slack
from the lap part of harness
before tightening.
Pull the harness adjuster strap
8
to tighten the harness.
* The harness should have a
comfortable but snug fit around
the child. A snug strap should not
allow any slack. It lies in a relatively
straight line without sagging. It
does not press on the child's flesh
or push the child's body into an
unnatural position. You should not
be able to pinch excess.
Fasten the chest clip.
9
* The correct height for the chest
clip is at the middle of the chest at
armpit level.
Checklist
Before traveling, verify that the:
9 Harness straps are not twisted.
9 Harness is snug.
9 Buckle is fastened.
9 Chest clip is at the child's armpit level.
Securing Your Child
Pull the harness adjuster away
from the child seat (parallel to the
ground) to tighten.
Do not pull sideways.
6
57