Britax Roundabout 55 Guide D'utilisation page 51

8 Pull slack through the belt slot
toward the vehicle belt retractor.
9 Attach the Versa-Tether to a
designated anchor (see vehicle
owner's manual) and remove
slack.
10 Store excess webbing in the
elastic strap.
11 Replace the cover.
Check that no more than
20% or 7.6 cm (3 inches)
of the base hangs over the
edge of the vehicle seat
LESS than 2.5 cm (1 in.)
of movement (front to back or
side to side) at the belt path
Checklist
9 Check that the vehicle belt is securely fastened.
9 Check that no more than 20% or 7.6 cm (3 inches) of the base hangs
over the edge of the vehicle seat
9 Check that the child seat cannot be moved front to back or side to side
more than 2.5 cm (1 in.) at the belt path. If the child seat is not secure,
repeat installation or use a different seating location.
9 Check that any excess Versa-Tether
vehicle and secured in the elastic strap.
Check Versa-Tether
(Top Tether) attachment
Check that there is
Forward-Facing Installation
®
Check that Versa-Tether
(Top Tether) webbing is
stored in the elastic strap
Check buckle
connection
webbing is contained within your
®
8
®
49