Britax Roundabout 55 Guide D'utilisation page 42

Rear-Facing Installation
1 Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
2 Remove the body pillow, unbuckle
the harness, and remove the belly
pad.
3 Lift back cover, then pull seat
cover forward while pulling the
buckle through to access the rear-
facing belt path.
4 Route the vehicle seat belt
through the rear-facing belt slots,
then buckle.
TIP: Ensure the vehicle belt is not
twisted.
5 Push the child seat into the
vehicle seat while removing slack
(see pages 8 – 11).
6 Rear-facing installations can be
improved by the use of the Versa-
Tether (see page 26 – 29).
7 Replace the cover and belly pad.
40
1b
1a
4
5