Britax Roundabout 55 Guide D'utilisation page 54

Forward-Facing Installation
1 Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
2 Remove the body pillow and
unbuckle the harness.
3 Lift back cover, then pull seat
cover forward to access the
forward-facing belt path.
4 Route the vehicle seat belt
through the forward-facing belt
slots, then buckle.
TIP: Ensure the vehicle belt is not twisted.
Push the child seat into the
5
vehicle seat while removing slack
(see pages 8 – 11).
6 Attach the Versa-Tether to a
designated anchor (see vehicle
owner's manual) and remove
slack.
7 Store excess webbing in the
elastic strap.
8 Replace the cover.
52
1b
1a
4
5