Maintenance And Service; Warranty/Liability - Soehnle Professional 9360 Notice D'utilisation

1.5 Maintenance and service

The scale requires no routine maintenance. However, it is useful to check the accuracy at
periodic intervals. The frequency depends on use and the condition of the scale. Where
discrepancies are found, please contact your dealer or Soehnle Professional service partner.
Note:
This device has radio interference suppression according to the applicable EC directive
2004/108/EC.
Under extreme electrostatic and electromagnetic influences, such as when operating a radio
or mobile phone in the immediate vicinity of the device, however, influence of the scale may
be caused.
When the electrostatic interference is no longer present, the product can again be used for
its intended purpose. You may need to switch it on again. If there is permanent electrostatic
interference, we recommend grounding the platform.
The device is a measuring instrument. Drafts, vibrations, rapid changes in temperature and
direct sunlight may have an effect on the accuracy of the scale. The scale meets the
requirements of Protection Class IP 42. High humidity, vapors, corrosive liquids and severe
soiling should be avoided.

1.6 Warranty/Liability

If a fault or defect is present on receipt of the unit, which is within the scope of responsibility
of Soehnle Industrial Solutions, Soehnle Industrial Solutions shall have the right to either
repair the fault or supply a replacement unit. Replaced parts shall be the property of Soehnle
Industrial Solutions.
Should the fault repairs or replacement delivery not be successful, the statutory provisions
shall apply.
The period of warranty begins on the day of purchase. Please retain your receipt as a proof
of purchase. Should your scale require servicing, please contact your dealer or Soehnle
Professional Customer Service.
No responsibility shall be accepted for damage caused through any of the following
reasons:
Unsuitable or improper storage or use, incorrect installation or commissioning by the owner
or third parties, natural wear, changes or modifications, incorrect or negligent handling,
overuse, chemical, electrochemical or electrical interference or humidity, unless this is
attributable to negligence on the part of Soehnle Industrial Solutions.
If operating, climatic or any other influences lead to a major change in conditions or material
quality, the warranty for perfect unit functioning shall be rendered null and void. If Soehnle
Professional provides an individual warranty, this means that the unit supplied will be free of
faults for the length of the warranty period. Always keep the original packaging in case you
have to return the scale.
14