Fulgor Milano F7SRC36S1 Notice D'installation page 38

7. COMPLETING THE INSTALLATION
EN
7.2 Ventilation
PANEL READY AND CLADDED MODELS
A forced air system assures ventilation through a
grille, secured to the unit with magnetic plates,
positioned in the lower front part of the unit
1
If the kitchen cabinet includes a kickplate, it must be
placed in a way to ensure optimal airflow
2
In case of placing a kickplate differently from picture
[ 2 ], the kickplate must have vents / openings at
least of an area equal to 50% of the area delimited
by A and B dimensions in picture
3
B
36 '' model
A 860 (33 7/8")
B
C
38
[ 1 ].
[ 2 ].
min 100mm (4")
50mm (1 ⅞")
[ 3 ].
30 '' model 24 '' model
740 (29 1/8") 560 (22")
> 100 (4")
10 (3/8")
The condenser must to be cleaned on a regular
basis. In order to do that, the front grille has to be
[ 4 ].
accessible
4
Stainless exterior Pro SERIES:
Ventilation is accomplished by a forced air system
through a grille located in the upper part of the
appliance. This grille should never be covered
by panels or any other devices that could reduce
its efficiency. Please refer to page Technical
specifications sections for Stainless exterior Pro
models to ensure correct air circulation.
C
C