Fulgor Milano F7SRC36S1 Notice D'installation page 31

6. INSTALLATION: BOTTOM COMPRESSOR MODELS
IMPORTANT: The following instruction for installation apply to all Fulgor Milano models.
6.1 Built-in installation of
single appliance
For a built-in installation, to cover gaps between
the appliance and the adjacent cabinets and affix
the appliance to the cabinetry, use the supplied
10 x piece bracket kit. Follow the instructions
included in the bag with the brackets for
placement of brackets on the appliance.
Operate as follows:
> Push the appliance into the installation cutout
1
> Always mount front panel on door before
pushing the unit into its final position inside the
cutout or structure.
> Check the levelling of the appliance, adjusting
its feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets
using the 10 x spacer brackets.
Door must be open to access the brackets. Screws
for fixing the brackets to adjacent cabinetry are
not included.
2
> Mount the bracket covers: first insert them
laterally and then push firmly until a "click" is
heard [ 3 ].
[ 1 ].
Side profiles mounting:
(Bird's eye view)
A Plastic connecting brackets
B Profile trim cover
6.2 Built-in installation of two or more
appliances
>
[ 2 ].
wine cellar columns.
Operate as follows:
>
area, leaving enugh space to operate at their back
[ 1
3
Appliance
A
Click!
B
Wall or furniture
The central profile is provide with freezer and
Plastic covering frames are provided for
closing gaps between the appliance and the
adjacent cabinets.
Position the appliances in front of the installation
].
Click!
B
EN
31