Fulgor Milano F7SRC36S1 Notice D'installation page 32

6. INSTALLATION: BOTTOM COMPRESSOR MODELS
EN
IMPORTANT: the appliances must be level with one another. This can most easily be achieved by
aligning the holes in the mounting brackets on each appliance with one another.
> Access the back of the appliances to mount the joining brackets: fix one side of the top and lower brackets
to one of the appliances and subsequently to the other
pages.
BOTTOM COMPRESSOR UNITS
1
A
32
B
[ 1 ] minding the gap as per the table on the subsequent
C
C
TOP COMPRESSOR UNITS