Fulgor Milano F7SRC36S1 Notice D'installation page 34

6. INSTALLATION: BOTTOM COMPRESSOR MODELS
EN
C
18" model
24" model
B
30" model
36" model
Once the appliances have been adjusted and
properly levelled, loosen the two screws holding
the sealing plate in position.
Lower the plate until flush with the floor, and re-
tighten the screws. This will ensure optimized
airflow through the condenser necessary for proper
operation.
> Next join them at the front attaching the plastic
connecting brackets with the supplied screws
It is suggested to use two screws for connecting
each bracket; one from each side
34
Distance between units (A+B)
18" model 24" model
7/8" (22 mm) 15/16" (23.5 mm)
15/16" (23.5 mm) 1" (25 mm)
1" (24.5 mm) 1" (26 mm)
1" (25.5 mm) 1 1/16" (27 mm)
[ 3
[ 4 ].
A
30" model
1" (24.5 mm)
1" (26 mm) 1 1/16" (27 mm)
1 1/16" (27 mm)
1 1/8" (28 mm)
].
3
36" model
1" (25.5 mm)
1 1/8" (28 mm)
1 1/8" (29 mm)
4