Fulgor Milano F7SRC36S1 Notice D'installation page 26

5. PANELS MOUNTING
EN
5.6 Panels dimensions: single bottom-drawer
Panels can have thickness ranging between 18 mm (3/4") and 28 mm (1-1/8").
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum weight of 11kg
(25 lbs). Exceeding these weights could void your warranty for any service issues which can be attributed to
overweight panels.
The hinging mechanism on Fulgor Milano appliances is considered to be `Zero-clearance`. The door and drawer
widths specified below assume the minimum cutout width is being used and a 3.5mm (1/8") reveal is desired
around the panels. Adjust your panel dimensions accordingly to your own design criteria considering your
cutout width and your reveal. Minimum reveal / gap should not be less than 1.5mm (1/16").
MODEL
DOOR/DRAWER WIDTH A
36" 908 (35 3/4")
30" 756 (29 3/4")
24" 604 (23 3/4")
Example:
84" cutout height
36" cutout width
4" toe kick height
1/8" gap desired all around
26
DOOR CUTOUT WIDTH B
627 (24 3/4")
477 (18 3/4")
327 (12 7/8")
3 ( ⁄ ")
A
Door panel:
Width: 35-3/4"
Height: 54-3/4"
Drawer panel:
Width: 35-3/4"
Height: 84"-1/8"-54-3/4"-1/8"-4"=25"
If you want a 6" toe kick height then your bottom drawer panel
height would be 23"
min 200 (7 ⁄ ")
135 135
(5 ⁄ ") (5 ⁄ ")
115 (4 ½")
B