Fulgor Milano F7SRC36S1 Notice D'installation page 13

Door Swing Clearance
36" model: 1470 mm (57 ⅞")
30" model: 1320 mm (52")
24" model: 1170 mm (46")
36" model: 230 mm (9")
30" model: 195 mm (7 ¾")
24" model: 160 mm (6 ¼")
1016 mm (40")
635 mm (25")
560 mm (22")
75 mm (3")
36" model: 914 mm (36")
30" model: 762 mm (30")
24" model: 610 mm (24")
36: 914 (36")
30: 762 (30")
24: 610 (24")
18: 457 (18")
min 10 (⅜")
Minimum distance from
the wall (hinge side)
36" model: 230 mm (9")
30" model: 195 mm (7 ¾")
24" model: 160 mm (6 ¼")
10 mm (⅜")
58 mm (2 ¼")
If the units are to be installed inside
a cutout or within an enclosed
structure, it is necessary to design
a ventilation shaft at the back of the
cutout to assure proper ventilation at
the back of the unit.
Cross-sectional chimney ventilation
area should equal 200cm² (31in²).
EN
635 mm (25")
560 mm (22")
75 mm (3")
13