Fulgor Milano F7SRC36S1 Notice D'installation page 15

Door Swing Clearance
36" model: 1470 mm (57 ⅞")
30" model: 1320 mm (52")
24" model: 1170 mm (46")
36" model: 230 mm (9")
30" model: 195 mm (7 ¾")
24" model: 160 mm (6 ¼")
1016 (40")
635 mm (25")
560 mm (22")
75 mm (3")
36" model: 899 mm
30" model: 749 mm (29 ½")
24" model: 599 mm
Minimum distance from
the wall (hinge side)
36" model: 230 mm (9")
30" model: 195 mm (7 ¾")
24" model: 160 mm (6 ¼")
10 mm (⅜")
58 mm (2 ¼")
(35 ⅜")
(23 ⅝")
If the units are to be installed inside
a cutout or within an enclosed
structure, it is necessary to design
a ventilation shaft at the back of the
cutout to assure proper ventilation at
min 10 (⅜")
the back of the unit.
Cross-sectional chimney ventilation
area should equal 200cm² (31in²).
EN
635 mm (25")
560 mm (22")
75 mm (3")
15