Fulgor Milano F7SRC36S1 Notice D'installation page 37

7. COMPLETING THE INSTALLATION
7.1 Anti-tipping safety assembly
If the appliance(s) is not connected through
the side profile trims to secured cabinetry
you must install the anti-tip brackets to
ensure the product does not fall forward
during use and cause damage or injury.
Failing to secure the appliance(s) securely
will void any warranty claim attributable to
a tipping situation.
Operate as follows:
> The brackets should be applied as illustrated using
the provided screws If using the anti-tip brackets,
lag into wood framing or concrete - drywall will not
hold the weight of appliance.
Place a bracket on the top of the appliance in
correspondence to the fixing holes and against the
wall [ 1 ].
" ) " )
⁄ ⁄
1 1 1 1
4 5 ( 4 5 (
> Mark up the holes position on the wall
2
BOTTOM COMPRESSORS
UNIT
[ 2 ].
TOP COMPRESSORS
UNIT
> For concrete, drill the wall with an 8 mm (3/8")
bit and insert the expansion plug
3
> Reposition the bracket and fix it first to the
appliance and then to the wall
4
BOTTOM COMPRESSORS
MODEL
In order to use the anti-tip brackets on the
top compressor models, it will be necessary
2 x 2 x to temporarily remove the top, metal ceiling
/ shield to access the bolting points for the
6 x 6 x
brackets.
[ 3 ].
[ 4 ].
TOP COMPRESSORS
MODEL
EN
37