Install The Control Horn - Staufenbiel EDGE 540 Instructions De Montage

3. Do not insert the eyelets of the hinge into the
vertical fin, or it will impede the free movement of
the rudder, after the mounting of the rudder, check to
make sure the leading edge A will align with the edge
B, the leading edge C will parallel to the trailing edge
D. Adjust any misalignment before the glue dries
thoroughly.
4. Secure the rear landing gear strut using the pre
installed screws.

INSTALL THE CONTROL HORN

1. Attached the control horn to the aileron downside
with it toward the hinge line and secure it using the
provided screws from the horn side.
EN
25