Install The Main Landing Gear; Hinge On The Rudder - Staufenbiel EDGE 540 Instructions De Montage

EN
24

INSTALL THE MAIN LANDING GEAR

HINGE ON THE RUDDER

1. Install the main lan-
ding gear by fitting the
gear into the fusela-
ge fully as the picture
shows.
2. Install the fairing plate
to the pre-notched slot
on the landing gear fai-
ring base.
3. Secure the fairing
plate using 4 pieces of
screws in stored with the
plate.
1. Apply glue to the holes on the vertical stabilizer for
the rudder hinges installation.
2. Insert the rudder hin-
ges to the tail fin.
Note: Insert the
L bend of the rear
landing into the rud-
der control horn base
while mounting the
rudder.