EN
28
MOUNT THE MAIN WING
1. Turn over the fuselage so the bottom of the plane
face up, slide the starboard wing panel into the wing
mounting saddle while threading the aileron control
servo lead to the fuselage.
2. Insert the main wing panel reinforcing connecting
tube into the round hole on the mounted the main
wing.
3. Slide the port side (left) wing to the wing tube all
the way to the wing saddle the same with the right
panel, make sure it is fully fitted into place.
4. Secure the main wing from the servo hatch using
four pieces of provided machine screws (PM 3.0x50)