Assembly Of The Wings - Staufenbiel DHC-2 BEAVER Instructions De Montage

Mount the wing clips onto the fuselage as shown in the illustration, using the enclosed 3x10 mm
screw.
12
Take the left wing and push the two wing pins into the holes in the fuselage. Thread the servo wires
and the landing flap linkage into the holes in the fuselage. Now push the wings up to the fuselage
and push them with pressure onto the wing clips till you hear a click. Mount the right wing analo-
gously.
14
16
ASSEMBLY OF THE WING CLIPS
13

ASSEMBLY OF THE WINGS

15
EN
21