JVC AV32L2EU Manuel D'instructions page 27

AV28L2EU_Eng.book Page 26 Wednesday, March 7, 2001 4:37 PM
INSTALL
2
Press the green button and start the IN-
SERT function.
EDIT
PR ID
AV
01 BBC1
02
03
04
05
06
07
08
09
BACK
OK 0
TV
CH / CC
D0034-EN
Press the ë buttons to choose "CC" or
3
"CH" according to the CH/CC number of
the TV channel.
When the COUNTRY setting is FRANCE:
Choose "CH1", "CH2", "CC1" or "CC2".
To cancel the INSERT function:
#
Press the (Information) button.
4
Press the Number buttons to enter the re-
maining CH/CC number.
The TV shifts to registration mode.
When the registration is completed, the picture of the TV
channel appears on the screen.
Note:
• The CH/CC number is a number indicating the
broadcast frequency to the TV. If the TV cannot de-
tect the TV channel corresponding to the broadcast
frequency indicated by the CH/CC number, a pic-
ture in the no-signal state appears.
'(/(7( '(/(7( '(/(7( '(/(7(
Press the ë buttons to choose a TV
1
channel.
Every time you press the ë buttons, the Programme
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR) ap-
pears on the screen.
2
Press the yellow button to delete the TV
channel.
The TV channel is deleted from the Programme num-
bers (PR) list.
0$18$/ 0$18$/
0$18$/ 0$18$/
Preparation:
• As long as you register the TV channel (SECAM-L system)
from a French station, be sure to set the COUNTRY setting
to FRANCE. If the COUNTRY setting is not FRANCE, follow
the description "Changing the COUNTRY setting" on
page 28 to change the COUNTRY setting to FRANCE, then
start the MANUAL function.
Press the ë buttons to choose a Pro-
1
gramme number (PR) to which you want to
register a new TV channel.
59
CH / CC
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH
CC 02
CC 03
9
AV32/28L2EU/ LCT0887-001A-U/ English
2
Press the blue button to activate the MAN-
UAL function.
At the right side following the CH/CC number, the SYS-
TEM (broadcasting system) of the TV channel appears.
MANUAL
PR ID CH / CC
AV
01 BBC1 CH 21
02 CH 22
03 CH 23
04 CH 24
05 CH 25
06 CH 26
07 CC 01
08 CC 02
09 CC 03
BACK
TV OK
SYSTEM
D0035-EN
To cancel the MANUAL function:
#
Press the (Information) button.
Press the î button to choose the SYSTEM
3
(broadcasting system) for a TV channel
you want to register.
TV channel (SECAM-L system) from a French
station:
Set the SYSTEM to "L". If it is set to one other than "L",
you cannot receive the TV channel of the SECAM-L sys-
tem.
Other TV channels:
If you do not know the correct broadcasting system, set
the SYSTEM to "B/G". If "B/G" is not correct, it results in
the fact that you will not hear the sound normally when
the TV detects a TV channel. In this case, retry to set the
SYSTEM again correctly so that no problem arises.
4
Press the green or red button to search for
a TV channel.
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
5
Press the green or red button repeatedly
until the TV channel you want appears.
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV chan-
nel.
If you cannot hear the normal sound even when
the picture of the TV channel appears normal-
ly:
The SYSTEM setting is wrong. Press the î î î î button and
choose a SYSTEM that has normal sound.
á
6
Press the button and register the TV
channel to a Programme number (PR).
The normal EDIT menu is resumed.
( B / G )
SEARCH +
SEARCH-
FINE +
FINE-