JVC AV32L2EU Manuel D'instructions page 21

AV28L2EU_Eng.book Page 20 Wednesday, March 7, 2001 4:37 PM
EXT SETTING
'8%%,1* '8%%,1*
'8%%,1* '8%%,1*
You can choose a signal source to be output from an EXT-2
terminal.
You can choose any one of the output signal of the device
connected to the EXT terminal and the picture and sound
from a TV channel you are currently viewing to output it to the
EXT-2 terminal.
Press the ì buttons to choose the arrow
1
from the menu.
EXT SETTING
EXT-1
EXT-3
EXT-4
TV
BACK
TV OK
D0022-EN
Press the ë buttons to choose an EXT
2
terminal or TV.
The arrow in the menu represents a signal flow. The left
side of the arrow denotes a signal source output from the
EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT ter-
minal passes through the TV and is output from the EXT-
2 terminal.
TV:
The picture and sound of the TV channel you are cur-
rently viewing are output from the EXT-2 terminal.
á
3
Press the button to complete the set-
ting.
The menu disappears.
Note:
• During dubbing, you cannot turn off the TV. Turning
off the TV also turns off the output from the EXT-2 ter-
minal.
• When you choose an EXT terminal as an output, you
can view a TV programme or a picture from the other
EXT terminal while dubbing the picture from a de-
vice connected to the EXT terminal onto a VCR con-
nected to the EXT-2 terminal.
• The RGB signals from the TV games cannot be out-
put.Teletext programmes cannot be output.
53
DUBBING
EXT-2
AV32/28L2EU/ LCT0887-001A-U/ English