JVC AV32L2EU Manuel D'instructions page 17

AV28L2EU_Eng.book Page 16 Wednesday, March 7, 2001 4:37 PM
3,&785(#)($785(6 3,&785(#)($785(6
3,&785(#)($785(6 3,&785(#)($785(6
PICTURE FEATURES
DIGITAL VNR AUTO
DigiPure Pro AUTO
COLOUR SYSTEM
4:3 AUTO ASPECT
PICTIRE TILT
BACK
TV OK
D0015-EN
To display the PICTURE FEATURES menu:
á
1
Press the
(main menu).
Press the ë button to choose PICTURE
2
FEATURES, and press the
',*,7$/#915 ',*,7$/#915 ',*,7$/#915 ',*,7$/#915
The DIGITAL VNR function cuts down the amount of noise in
the original picture.
You can choose from the three DIGITAL VNR function set-
tings of AUTO, MIN and MAX.
Note:
• If you set the DIGITAL VNR effect too high it can make the
picture less sharp. It is recommended to use the AUTO
setting if you can.
Press the ë buttons to choose DIGITAL
1
VNR.
Press the ì buttons to choose a setting.
2
AUTO:
The TV will automatically adjust the level of the DIGITAL
VNR effect to match the amount of noise in the picture,
giving you the best possible picture.
MIN:
The level of the DIGITAL VNR effect is set to the mini-
mum. If you set the DIGITAL VNR function to AUTO but
feel that the sharpness of the original picture has not
been reproduced fully, change the setting from AUTO to
MIN.
• The MIN setting is not suitable for low-quality pictures
which contain a lot of noise.
MAX:
The level of the DIGITAL VNR effect is set to the maxi-
mum. If you set the DIGITAL VNR function to AUTO but
still notice some noise, change the setting from AUTO to
MAX.
• The MAX setting is not suitable for high-quality pictures
which contain very little noise.
á
3
Press the button to complete the set-
ting.
The menu disappears.
49
button to display MENU
á
button.
AV32/28L2EU/ LCT0887-001A-U/ English
'LJL3XUH#3UR 'LJL3XUH#3UR
'LJL3XUH#3UR 'LJL3XUH#3UR
The DigiPure Pro function uses the latest in digital technology
to give you a natural looking picture. The DigiPure Pro func-
tion includes the following two functions.
DigiPure function:
This function helps to create a natural looking picture by elim-
inating unnecessary edges from high-contrast and crisp im-
ages. Conversely, for images with low-contrast, edges are
added to produce a sharper, more detailed picture.
You can choose from the three DigiPure function settings of
AUTO, MIN and MAX.
Note:
• If you set the DigiPure effect too high on a low-quality pic-
ture that contains a lot of noise, this may actually make
the noise worse. It is recommended to use the AUTO set-
ting if you can.
Picture motion compensation function:
This function displays fast-moving pictures (for example, the
players or ball in a football game) more smoothly and natural-
ly on the screen.
Note:
• The effect level of the picture motion compensation func-
tion cannot be changed. The effect level is the same no
matter which of the AUTO, MIN or MAX settings is used.
Press the ë buttons to choose DigiPure Pro.
1
Press the ì buttons to choose a setting.
2
AUTO:
The TV will automatically adjust the level of the DigiPure
effect to match the amount of noise in the picture, giving
the best possible picture.
MIN:
The level of DigiPure effect is set to the minimum. When
you set the DigiPure Pro function to AUTO and notice
some noise, change the setting from AUTO to MIN.
• The MIN setting is not suitable for high-quality pictures
which contain very little noise.
MAX:
The level of DigiPure effect is set to the maximum. If you
set the DigiPure Pro function to AUTO but feel that the
original picture quality has not been reproduced fully,
change the setting from AUTO to MAX.
• The MAX setting is not suitable for low-quality pictures
which contain a lot of noise.
OFF:
The DigiPure Pro function is turned off.
á ý ý ý ý button to complete the set-
3
Press the
ting.
The menu disappers.