Publicité
Switching on and Use of TV 1001 Navigator
To switch on the TV 1001 Navigator it is necessary to sup-ply the
mains. The integrated controller automatically recognizes the
interlock and start signals presence and start up the pump.
"Soft Start" mode is used to start the pump after it has stopped for a
long time. To start with the "Soft Start" function on, activate the
mode in the software (see paragraph "RS 232/485 COMMUNICATION
DESCRIPTION" in the "Technical Information" appendix ).
The green LED located on the TV 1001 Navigator base front panel
indicates with its flashing frequency the system operating conditions:
TV 1001 Navigator User Manual / 87-900-945-01(L)
with no flashing: the pump is normally rotating;
slowly flashing (period of about 400 ms): the system is in ramp,
or in braking, or in Stop, or in "Waiting for interlock" status;
fast flashing (period of about 200 ms): error condition.
Instructions for Use
Use
235/310
16
Publicité
