Publicité
17
Technical Information
Interconnections
Figure 17
How to Connect the Open-Collector Inputs
of the Controller
Here below there are the typical connections of the open collector input of
TV551/701 Navigator to an external system. Two cases are considered:
1.
2.
Please note that on the connector a 24 Vdc, 60 mA voltage, a GROUND signal
and the open col-lector pin are available.
260/310
the customer supplies the 24 Vdc
the customer does not supply the 24 Vdc.
TV 1001 Navigator User Manual / 87-900-945-01(L)
Publicité
