Honda EM4500CXS Manuel De L'utilisateur page 66

Remote Control Kit (Optional Parts)
Using the remote control in wet conditions, such as rain or snow, or near a pool
or sprinkler system, or when your hands are wet, could result in malfunction.
Keep the remote control dry.
(degree of protection: IP3X)
1. Unscrew the four 6×10 mm flange bolts, and remove the side panel.
2. Remove the plug from the 6-pin
connector.
3. Connect the remote control cable to the 6-pin connector and remote control
box.
4. Pass the remote control cable through the cord grommet, and fit the
grommet into the cutout.
5. Reinstall the side panel using the four 6×10 mm flange bolts.
REMOTE CONTROL CABLE
CUTOUT
SIDE PANEL
REMOTE CONTROL BOX
CORD
GROMMET
50 mm
6-PIN CONNECTOR
6×10 mm FLANGE BOLT (4)
PLUG
63