Honda EM4500CXS Manuel De L'utilisateur page 53

5. Place a suitable gasoline container below the sediment cup, and use a funnel
to avoid spilling fuel.
6. Remove the sediment cup (see page 39), and then turn the fuel valve lever to
the ON position.
7. Allow the gasoline to drain completely, and then install the sediment cup (see
page 39).
FUEL VALVE LEVER
8. Change the engine oil (refer to page 36).
9. Remove the spark plug, and pour about a tablespoon of clean engine oil into
the cylinder. Turn the engine several revolutions slowly with the recoil starter
to distribute the oil, then reinstall the spark plug.
10. Slowly pull the starter grip until resistance is felt. At this point, the piston is
coming up on its compression stroke and both the intake and exhaust
valves are closed. Storing the engine in this position will help to protect it
from internal corrosion.
11. Disconnect the battery negative (–) terminal (see page 44). Cover the
battery cable negative terminal with vinyl tape.
Once a month, recharge the battery (see page 45).
12. Store the generator in clean area.
50
ON
ON