Honda EM4500CXS Manuel De L'utilisateur page 62

Wheel Kit Installation
1. Install the two wheels on the axle shaft using the plain washers and split pins.
2. Install the axle assembly on the generator using four 8×16 mm flange bolts
and 8 mm flange nuts.
3. Install the two stands on the under frame using four 8×16 mm flange bolts.
TORQUE: 24–29 N·m (2.4–3.0 kgf·m , 17–22 lbf·ft)
8×16 mm FLANGE BOLT (8)
WHEEL (2)
STAND (2)
LONGER
UNDER FRAME
AXLE SHAFT
20 mm
PLAIN WASHER (2)
8 mm FLANGE NUT (4)
GENERATOR
SIDE
4.0×28 mm
SPLIT PIN (2)
59