Honda EM4500CXS Manuel De L'utilisateur page 42

3. FUEL SEDIMENT CUP SERVICE
Gasoline is extremely flammable and is explosive under certain conditions.
Do not smoke or allow flames or sparks in the area.
The sediment cup prevents dirt or water that may be in the fuel tank from
entering the carburetor. If the engine has not been run for a long time, the
sediment cup should be cleaned.
1. Turn the engine switch to the OFF
position and remove the key.
2. Turn the fuel valve lever to the OFF
position. Remove the sediment cup
and O-ring.
3. Clean the sediment cup in nonflammable or high flash point solvent.
4. Reinstall the new O-ring and sediment cup.
5. Turn the fuel valve lever to the ON position and check for leaks.
After installing the sediment cup, be sure to tighten it securely. Check for
fuel leaks and make sure the area is dry before starting the engine.
FUEL VALVE LEVER
SEDIMENT CUP
OFF
O-RING
(Replace)
KEY
OFF
39