Honda EM4500CXS Manuel De L'utilisateur page 65

Hanger Kit Installation (Optional Parts)
1. Position the hanger at the generator's balance point as shown below.
2. Fit the end tabs of the hanger through the bracket slots, and bolt the brackets
to the hanger and tighten securely.
TORQUE: 24–29 N·m (2.4–3.0 kgf·m, 17–22 lbf·ft)
8×16 mm FLANGE BOLT (4)
62
HANGER
HANGER
HANGER
BRACKET (2)
280 mm (11 in)
GENERATOR
SIDE