Honda EM4500CXS Manuel De L'utilisateur page 39

1. CHANGING OIL
Drain the oil while the engine is still warm to assure rapid and complete
draining.
1. Remove the 12×15 mm oil drain bolt and sealing washer, remove the oil filler
cap/dipstick, and drain the oil.
2. Reinstall the 12×15 mm oil drain bolt and new sealing washer. Tighten the
bolt securely.
TORQUE: 22 N·m (2.25 kgf·m, 16 lbf·ft)
3. Refill with the recommended oil (see page 16) and check the oil level.
Engine oil capacity: 1.1 L (1.2 US qt, 1.0 lmp qt)
4. Reinstall the oil filler cap/dipstick securely.
OIL FILLER CAP/
DIPSTICK
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take it in a sealed container to your local service
station for reclamation. Do not throw it in the trash or pour it on the ground.
36
SEALING
WASHER
(Replace)
12×15 mm OIL DRAIN BOLT
UPPER
LIMIT
LOWER
LIMIT