Honda EM4500CXS Manuel De L'utilisateur page 64

Battery
WARNING: Battery posts, terminals, and related accessories contain lead and
lead components. Wash hands after handling.
The battery is disconnected for shipment.
1. Remove the battery cover (see page 43).
2. Connect the battery positive (+) cable to the battery positive (+) terminal first,
and tighten the bolt securely.
3. Slide the battery boot over the positive (+) cable and terminal.
4. Connect the battery negative (–) cable to the battery negative (–) terminal,
and tighten the bolt securely.
5. Install the battery holder band.
Install the battery cover in the reverse order of removal (see page 43).
Never operate the generator without the battery cover in place, as poor engine
and generator performance will result.
BATTERY HOLDER BAND
BATTERY BOOT
POSITIVE (+) CABLE
NEGATIVE (–) CABLE
61