Snooze Function; Receiving Measurements Automatically; Weather Forecast From The Internet - Bresser WIFI 4Cast Guide Rapide

9. Move the alarm slider to
alarm is disabled.

15 Snooze function

1. When the alarm sounds, press the SNOOZE/LIGHT touch key to enable the snooze function. The
alarm sounds again after the set time interval has elapsed (see "Alarm setting").
2. When the alarm sounds, press any other key to stop the alarm until the set alarm time is reached
again.
3. If no key is pressed, the alarm is automatically switched off after 2 minutes.
NOTICE! If 'OFF' is selected for the snooze interval in the alarm time settings, the snooze func-
tion is not available.

16 Receiving measurements automatically

Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
17 3D weather forecast from the Internet
• This functionality requires a smartphone or tablet that meets the necessary hardware re-
quirements.
• An active Internet connection via Wi-Fi is required for this functionality.
The base station can graphically display weather data from the Internet for the current and the next 4
days by using an app. (For more information on setting up this functionality, refer to the chapter "Con-
figuration / Setting up a WIFI connection")
The different weather constellations are displayed on the base station as follows:
position to disable the alarm. The symbol is no longer displayed. The
31 / 56