Snooze Function; Display Change; Weather Forecast - Bresser National Geographic 9070700 Mode D'emploi

12 Snooze function

1. When the alarm sounds, press the SNOOZE/LIGHT button to activate the snooze function. The
alarm sounds again after 5 minutes.
2. When the alarm sounds, press any other key to stop the alarm until the set alarm time is reached
again.
3. If no key is pressed, the alarm is automatically switched off after 2 minutes.

13 Display change

• In normal display mode, press the SET button to switch between time and alarm.
• In normal display mode, press the UP button to toggle between °C and °F when displaying the
temperature unit.
• In normal display mode, press the CHANNEL button for about 3 seconds to clear the outdoor
sensor data and reinitialize sensor reception.
• In normal display mode, press the Max/Min button several times to display the set Max/Min values
one after another.
• During the Max/Min display, press the Max/Min button for about 3 seconds to clear the Max/Min
data. Every day at 0:00 a.m. the max/min data record is automatically deleted.

14 Weather forecast

A weather trend for the next 12-24 hours is calculated from the measured values and displayed graph-
ically as follows:
22 / 52