Troubleshooting - Bresser WIFI 4Cast Guide Rapide

Power supply
Indoor temperature measuring range
Indoor humidity measuring Range
Data display from the Internet*
Dimensions (W x H x D)
Weight
*This functionality requires a smart device with required hardware and an active Internet con-
nection via Wi-Fi.
Wireless outdoor sensor
Batteries
Maximum number of sensors
RF transmission frequency
RF transmission range
Maximum RF power
Outdoor temperature measuring range
Outdoor humidity measuring range
Protection class
Dimensions (W x H x D)
Weight
Wi-Fi specifications
Wi-Fi standard
Wi-Fi operating frequency
Maximum RF power
Supported devices
NOTICE! The name of the Wi-Fi network (SSID) must not contain any spaces and/or special char-
acters!
Hardware requirements for smart devices
Supported device types
Operating system
Wi-Fi standard support
Bluetooth support
Access point support

24 Troubleshooting

The app reports a general connection error (Error 1003).
• Data transmission from the Internet is not yet complete. Wait 30 minutes and start the app again.
• If the error message "Error 1003" persists, check the Wi-Fi connection. (see next point)
The app reports an error while establishing the Wi-Fi connection (failed to connect).
34 / 56
DC 5V / 1.2A mains power adapter
2 x 1.5V batteries, type AA/LR6
-20°C to 60°C ( -4°F to 140°F )
20% to 95% (RH)
Air pressure, wind speed/direction, "Feels like"
temperature, weather forecast
205 x 130 x 35 mm
368g (incl. mains power adapter, without batter-
ies)
2 pcs. of 1.5V batteries, type AA/LR6
1 pc. of thermo-hygrosensor (incl.)
2 pcs. of thermo-hygrosensor (optional,
#7009992)
433MHz
approx. 60m (in open terrain)
< 10mW
-40°C to 70°C (-40°F to 158°F)
20% to 95% (RH)
IPX4
50 x 96 x 34 mm
54g (without batteries)
802.11 b/g/n
2.4 to 2.4835 GHz
<100mW
see hardware requirements
Smartphone, Tablet PC
Apple iOS (version 9.0 or higher)
Android (version 4.0.3 or higher)
802.11 b/g/n required
Version 4.1 or higher
required