Snooze Function; Temperature Alarm Setting - Bresser 7007600000000 Mode D'emploi

2.
3.
4.
5.
6.
7.
8.
9.

13 Snooze function

1.
2.

14 Temperature alarm setting

1.
2.
32 / 76
Press and hold ALARM button for approx. 2 seconds to
change to alarm time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press ALARM button to confirm and continue to the
next setting.
Settings order: Hours > Minutes
Finally press the ALARM button to save the settings
and exit the setting mode.
Press SET button to activate the alarm. The symbol
will be displayed. The alarm is activated.
Press SET button again to disable the alarm. The
symbol will not be displayed. The alarm is disabled.
When the alarm sounds, press SNZ button to activate
the snooze function. The alarm will sound again in 5
minutes.
Press any other button when the alarm sounds to inter-
rupt the alarm until the alarm time will be reached
again.
In normal time display mode, press DOWN button for
approx. 2 seconds to enter temperature alarm time set-
ting mode.
Digits to be set are flashing.