hager SH701AX Notice D'installation page 113

5.2.4 Testing the voice keypad
IMPORTANT: the keypad must be in installation mode (see keypad installation manual).
1. Press the "Off" button.
5.2.5 Testing the detectors
1. Press the detector
"test" button
for more than 5 s.
ou
5.2.6 Testing the siren
1. Press and hold the siren
"test" button for more
than 5 s. The siren will
beep once and the LED
will flash for 3 s.
2. The control panel issues
the voice message:
2. The control panel issues the voice message:
2. The control panel issues
the voice message:
"beep, test, siren X,
"beep"
"beep, disarm,
remote control X"
relayed"
3. The keypad issues a
long beep to confirm.
"beeep"
"beep, test,
detector X, group
Y, immediate
(or delayed
or combined),
relayed"
3. The siren issues a long
beep to confirm.
"beeep"
113