hager SH701AX Notice D'installation page 112

5.2 Testing the radio range
Before fixing the relay and relayed products in place, position them in the intended location
and then test the radio range.
If the tests are satisfactory, fix the relay and relayed products in place. If not, move
them to a different location.
5.2.1 Testing the radio repeater relay
1. Press the relay "test"
button for more than
5 s. The LED lights up
green.
5.2.2 Testing the remote control unit
1. Press the "Off" button.
5.2.3 Testing the keypad
IMPORTANT: the keypad must be in installation mode (see keypad installation manual).
1. Press the "Off" button.
112
2. The control panel issues
the voice message:
"beep, test,
device X"
2. The control panel issues
the voice message:
"beep, disarm,
remote control X"
2. The control panel issues
the voice message:
"beep, disarm,
remote control X"
3. The relay issues a long
beep to confirm.
"beeep"
3. The remote control LED
lights up a steady green
for 1.5 s to confirm.
3. The keypad issues a
long beep to confirm.
"beeep"