Door height adjustment
Door can be raised vertically. This process can be performed easily using an Allen wrench
as illustrated in the figure. Door shelves should be empty when adjusting the door height.
• Remove the lower ventilation cover as described in the previous page. (1)
• Loosen the 3 screws of the lower door hinges using a screwdriver. (Do not remove completely)
(2)
1
• If the freezer compartment door is lower than the fridge compartment door, bring them to
the same level by turning the turning the elevation screw on the freezer compartment side
in the direction of arrow using a M6 Allen wrench as illustrated in Step (3).
• If the freezer compartment door is higher than the fridge compartment door, bring them to
the same level by turning the turning the elevation screw on the fridge compartment side in
the direction of arrow using a M6 Allen wrench as illustrated in Step (3).
After bringing the doors to the same level by elevating the front part with the aid of the
elevation screws, doors of the refrigerator shall close properly. If the doors do not close
properly, this might adversely affect the efficiency of the refrigerator.
All manuals and user guides at all-guides.com
Allen wrench
8
EN
2
3