Switching The Installation On - SOMFY V300 Manuel D'installation Et D'utilisation

V300
x x x x x x x x x x x x
b c

5.3 Switching the installation on

Once installation is complete, reconnect the gate motorisation to the power supply.
Next connect the monitor mains adaptor to an electrical socket.
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.
[5]. Replace the glass in the ring.
Attention: for the 1-button version,
there is a guide lug which allows
the glass to be fitted in one single
position only.
[6]. Replace the name plate in the button.
x x X x
d
[7]. Replace the base plate: align the
markers on the base plate and the
ring and turn the base plate clockwise
(using the lugs on the plate) until the
stop block.
[8]. Replace the button on the door
station: align the lug on the ring with
the marker on the door station and
turn clockwise until locked.
If the button does not fit back into the door
station, rotate it half a turn.
y y y y y y y y y y y y Y y
z z z z z z z z z z Z z
b
c
c
b
d
EN
13