Using The Videophone; Responding To A Visitor; Opening The Gate And/Or Unlocking The Electric Latch (Or Lock); Talking Via Two Monitors - SOMFY VSYSTEMPRO Origin RTS Manuel D'utilisation

When a visitor presses the call button on the external module, the monitor rings and the image of the visitor is displayed on
the monitor(s) depending on the configuration of the installation.

7.1 Responding to a visitor

[1]. Press button
activated .
[2]. You can communicate with your visitor.
Note: you can communicate with your visitor for a maximum of 1 or 2 minutes depending on the configuration of the external
module.
[3]. Press the button
module is

7.2 Opening the gate and/or unlocking the electric latch (or lock)

Depending on the installation, this function can be activated by the button
R0
R1
9020031
R2
[*] if your installation includes several relay modules ref. 9020031, the number of times you press the
the relay to be activated (use the guide at the beginning of this document to see the corresponding functions).

7.3 Talking via two monitors

This function is only available if your installation has two monitors configured to accept this function. Communication between
two monitors is only available in audio mode.
[1]. On the 1st monitor, press the
monitor to be called.
- The 2nd monitor rings.
[2]. On the 2nd monitor, press the
- Audio communication is open between the two monitors.
[3]. To terminate the communication, press the
Copyright © 2016 Somfy SAS. All rights reserved.

7 USING THE VIDEOPHONE

, the LED located behind the pictogram lights up and communication with the external module is
again, the LED located behind the pictogram goes out and communication with the external
terminated.
or or
[a]
[b]
or or
[a]
[b]
button the number of times corresponding to the address or the extension of the
button.
While communicating
with a visitor
Press the button.
- The external module
relay is activated and the
monitor screen switches
[c]
off.
Press the
button.
- Relay R1 is activated.
Press the
[c]
twice [*].
- Relay R2 is activated.
button on one of the two monitors.
and/or the button .
While there is no communica-
tion with a visitor
[1]. Press the
the screen is switched on
and displays the video
from the external module
(ID = 1).
Note: if you press the
button twice, the video from the
external module configured with
ID = 2 is displayed.
[2]. Press the
to operate the gate (to
close it for example) or
the electric latch/lock; the
screen is switched off.
or
Press the
- Relay R1 is activated.
Note: pressing the
button
activates the "do not disturb"
function.
EN
button,
button
button.
button
button determines
10