SOMFY V300 Manuel D'installation Et D'utilisation page 117

V300
3.3.2 For two residences
The videophone V300 also offers you the possibility of configuring the interphone for two separate residences. In this case, the 2
residences must be cabled using a junction box installed on the 2 wires leading from the door station fitted with two call buttons (see
"4.2 Installation for two residences").
This configuration allows 1 additional monitor to be installed per residence.
Note: The monitor for the second residence is not provided in the initial pack.
Distance between the door station and the furthest monitor
Less than 50 m
A C
B
Between 50 and 100 m
Less than 30 m
E
D
F
G
You are advised to use flexible cables and to tin the bare ends or fit them with end-pieces to be crimped.
The maximum wire section for the terminals is 1 mm².
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.
30 max.
Optional
G
Optional
G
Note: We recommend that the
videophone cable and the motor
cable(s) be installed in separate
F
sheaths.
F
E
G
230 V AC
D
230 V AC
5 max.
230 Vac
C
230 V AC
B
G
230 V AC
A
Cable to be used
2 wires of min. 0.5 mm²
2 wires x 1 mm²
2 wires of min. 0.5 mm²
2 wires of min. 0.75 mm²
2 wires of min. 0.5 mm²
EN
7