Electrical Connections - BORETTI BPO-45 Notice D'emploi

Electrical connections

Before connecting the oven to the mains power supply, make sure that:
- The supply voltage corresponds to the specifications on the data plate on the front of the oven.
- The mains supply has an efficient earth (ground) connection complying with all applicable laws and
regulations. Correct earthing (grounding) is a legal requirement.
EN
The power cable should never reach a temperature 50° C above ambient temperature at any point
along its length.
If a fixed appliance is not provided with a power cable and plug, or some other device permitting it
to be disconnected from the mains electricity supply, with a gap between the contacts big enough to
guarantee class III overvoltage protection, then such a device must be fitted to the power supply in
compliance with the regulations governing electrical installations.
The socket or switch must be easily reachable with the oven fully installed.
N.B. The manufacturer declines all responsibility for damage or injury if the above
instructionsntinfortunistiche non vengano rispettate.
H05RR-F 3x1,5 mm²
H05VV-F 3x1,5 mm²
H05RN-F 3x1,5 mm²
H05V2V2-F 3x1,5 mm²
CABLE TYPES AND MINIMAL DIAMETERS
66
SASO
H05RR-F 3x2,5 mm²
H05VV-F 3x2,5 mm²
H05RN-F 3x2,5 mm²
H05V2V2-F 3x2,5 mm²